search

JOINER RAUTE

The splicer for sheets is suitable for the optimization of sheets with defects or strips and their splicing to obtain full sheets to size.

  SERVICES

Possibility of revision and installation

  CUSTOMER CARE

Our customer service is at your disposal for any additional information.

JOINING MACHINE FOR SHEETS

The splicer for sheets is suitable for the optimization of sheets with defects or strips and their splicing to obtain full sheets to size.

The loading of the veneers on the plant takes place with motorized loading roller conveyors.

An unloading roller conveyor allows the empty pallet to be quickly evacuated to reduce the time required to change the packs of material to be processed.

The introduction of the sheets on the line can take place by means of an automatic vacuum loader

After introduction, the sheets are aligned.

The optimization of the sheets / strips takes place through the control of a camera and a cutter. During this phase the material is held by chains to ensure the precision of the cut and the correct approach of the parts to be joined.

A group of levers also controls the thickness of the veneer to be joined, determining any incorrect thicknesses. (if found the part with incorrect thickness will be eliminated)

The part of the sheet to be discarded is automatically dropped into a ribbon and shredded by a mechanical cutter.

           

The splicing of the material is obtained by suitably heated thermo-melting wires.

After the application phase of the hot melt yarn on the veneer, the glue is cooled,

by ventilation with cold air.

        

After joining, the veneer is cut according to the required measurements and stacked.

on the lifting table and unloaded by means of roller conveyors.

This allows and facilitates the subsequent composition processes in the pressing department,

as well as improving the quality of the product made.

chat Comments (0)
No customer reviews for the moment.